德國MUBEA致力于高質量碟形彈簧生產已有近50年的歷史，碟形彈簧從原材料在自己的冷軋工廠加工開始，全部產品的生產都是自主進行。此外，模具的設計，制造和維護也均是在本工廠完成的。除標準原材料50CrV4外，慕貝爾庫存有不同種類的抗磁性材料，防腐材料和耐高\低溫材料以滿足產品的特殊要求。慕貝爾裝備精良的實驗室可以按照客戶的要求進行各種性能測試。
碟簧成圓錐形盤狀，作為密封輔助件，既可以單個使用，又可以多個串聯或并聯使用，被壓縮后產生變形，直至被壓平，當連接件由于熱脹冷縮、壓力變化、機械振動時碟簧的回復力用來補充螺栓、墊片、填料使用中對保持額定載荷的持續要求，減少不必要的停機維修時間和泄漏損失。
規格類別:
DIN2093標準，相關代號：180034（40*20.4*2.5*3.45），180053（50*25.4*3*4.1）
軸承用碟簧：相關代號：200017（46.5*30.5*0.6*1.5）
DIN6796標準，相關代號：M30(70*31*7)
應用廣泛：
德國MUBEA碟形彈簧根據性能和應用領域分類：普通碟形彈簧（電廠鍋爐懸掛系統、安全閥門、變壓器超載保護組件、連軸器、纜車、機床刀具夾頭、升降機及電梯安全制動系統、工程車輛和軌道車輛用制動器、滾珠軸承的間隙補償、減振器等）、開槽型碟形彈簧（自動變速箱、超載離合器、離合器等）、特殊彈簧（離合器、變速箱及變速器等）、波形彈簧（自動變速器、間隙補償組件等）。
The German MUBEA has been committed to high-quality disc spring production for nearly 50 years old, the disc spring from the processing of raw materials in their own cold rolling factory, the production of all products is conducted independently. In addition, the design, manufacture and maintenance of the molds are also completed at the factory. Except for standard 50CrV4, Mubel has different kinds of magnetic resistance materials, anticorrosion materials and high resistance \ low temperature materials to meet the special requirements of the product. Mubel’s well equipped laboratory can perform various performance tests as per customer requirements.
The disc spring into a conical disk, as a sealing auxiliary, can be used alone, and used in series or parallel, after compression deformation until flattened, when the return force of the disc due to thermal expansion, pressure changes, mechanical vibration to supplement the continuous requirements of bolts, gaskets, packing, reduce unnecessary maintenance time and leakage loss.
Specification & Category:
DIN2093 Standard, Related Code: 180034 (40 * 20.4 * 2.5 * 3.45), 180053 (50 * 25.4 * 3 * 4.1)
Plate spring for bearing: relevant code: 200017 (46.5 * 30.5 * 0.6 * 1.5)
DIN6796 standard, relevant code name: M30(70*31*7)
Extensive used:
German MUBEA disc spring is classified by performance and application field: ordinary disc spring (plant boiler suspension, safety valve, transformer overload protection assembly, coupling, cable car, machine tool clips, lift and elevator safety brake system, engineering vehicles and rail vehicles, gap compensation for ball bearings, dampers, etc.), slot disc spring (automatic transmission, overload clutch, clutch, etc.), special spring (clutch, transmission and transmission, etc.), waveform spring (automatic transmission, gap compensation assembly, etc.).